Alesis MIXING CONSOLES Reference Manual page 26

2) Now turn the
sufficient level at the amplifier or mixer. Be careful not to turn
the
OUTPUT LEVEL
may cause your amplifier or mixer to overload.
3) Next, turn the
effect and direct signal is reached.
PLEASE NOTE:
optimum signal-to-noise ratio (quietest operation), it is always best to have the
control turned up as high as possible, but not so much that the
LEVEL
control up (clockwise) until there is
OUTPUT LEVEL
control up too high since the strong signal
control until the correct balance between
MIX
INTERFACING MIDIVERB III
21
For
INPUT
lights.
Clip LED