Using Midiverb Iii; Program Mode; Selecting A Program; With Value Buttons - Alesis MIXING CONSOLES Reference Manual

16 bit multi-effects processor with real-time midi parameter control

Hide thumbs

Table Of Contents

Table of Contents

SECTION 4

When power is first turned on, the MIDIVERB III automatically resets to

the Program mode and the last program selected before the power was

turned off will be currently selected.

For the purpose of illustration, let's assume that you are turning your

MIDIVERB III on for the first time. The MIDIVERB III's front panel should

look like this:

In the Program mode when initially powered up, note that the front panel

will display the following:

A) The PROGRAM LED will be lit, indicating that the MIDIVERB III is in the

Program mode.

B) The display will read the program number, in this case "000".

There are three ways to select a program on the MIDIVERB III when it is

in the Program mode; by using the

on the right of the front panel which function as a keypad in the Program

mode, or by receiving a MIDI program change (when Program Change

has been enabled).

If we desire to select program 023, for example, we could simply press

and hold the "up"

point, the MIDIVERB III's front panel would look like this: