Installation Or Replacement Of Batteries; Precautions Of Use; Declaration Of Conformity - Alcatel Temporis 42 User Manual

Alcatel solutions telephone user guide temporis 42
Table of Contents

Advertisement

Temporis_42_uk.qxd

INSTALLATION OR REPLACEMENT OF BATTERIES

Your phone uses 3 LR6-AA-AM3 1.5V Alkaline batteries without mercury and
cadmium, which are not supplied with the set. To avoid damaging your set, only
use leak-proof batteries.
Place/Replace the batteries as described below:
• For safety reasons, disconnect the telephone line cord from the wall socket.
• Open the battery compartment located on the bottom of the set pushing hard at
the door while sliding it back.
• Remove the used batteries and put the new ones in position, taking into account
the + and - polarities as shown engraved on the plastic inside the battery com-
partment.
• Close the battery compartment and connect the telephone set.
• Adjust the contrast of the display using the
• Adjust date and time as described in the paragraph "Date/Time".
• The lifetime of batteries is around 6 months in normal conditions of use.
• When batteries become weak, the battery icon starts flashing
replace your batteries as soon as possible.
NOTE: Without batteries or with empty batteries, your
perly but, if you disconnect it from the telephone line, the phone loses
since information like date and time but not the contents of memories.

PRECAUTIONS OF USE

Caution, never bring your telephone set in contact with water.
To clean your set however, you may use a damp cloth.
Never use solvents (trichlorethylene, acetone, ...) which may damage the plastic
surfaces of your telephone set. Never spray cleaning products on your set.
During storms, it is advised not to use the set.

DECLARATION OF CONFORMITY

• We would remind you that TEMPORIS 42 is approved in conformity with
European regulations, as certified by the
• It is designed to send and receive telephone communications and for connection
to the French public telecommunications network.
• Appliance designed for connection to a TRT3 class analogue telephone line (tele-
communications network voltage) as defined in standard NF EN 60-950.
• ATLINKS hereby declares that the TEMPORIS 42 appliance is compliant with the
essential requirements and other relevant provisions of directive 1999/5/CE.
• The certificate of conformity is available on the following Internet site:
"www.atlinks.com".
8
30/10/02
14:06
Page 8
and
keys.
; you have to
TEMPORIS 42
marking.
works pro-

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents