Advertisement
7)
Remove the screw [9].
8)
Disconnect the connector [10] to remove the LED PCB [11].
[9]
(4) Waste-Full Photosensor PCB
1)
Remove the punch controller PCB.
2)
Remove the two screws [1] to remove the PCB film [2].
[2]
[1]
3)
Disconnect the connector [3] to remove the waste-full photo-
sensor PCB [4].
[2]
(5) Waste Full LED PCB
1)
Remove the screw [1].
2)
Disconnect the connector [2] to remove the waste-full LED
PCB [3].
[3]
[10]
[11]
[3]
[1]
[4]
MX-FNX2/AR-PN1/MX-RBX1 DISASSEMBLY AND ASSEMBLY 6 – 17
Advertisement
Chapters
