Advertisement
(5) Processing Tray Upper Cover
1)
Remove the front cover. (See (2).)
2)
Remove the rear cover. (See (3).)
3)
Remove the upper cover. (See (4).)
4)
Disconnect the connector [1] and remove the screw [2].
[1]
5)
While lifting the processing tray cover [3], disconnect the con-
nector [4], then remove the processing tray upper cover [3].
(6) Upper Right Cover, Middle Right Cover
1)
Remove the front cover. (See (2).)
2)
Remove the rear cover. (See (3).)
3)
Open the upper cover, then remove the upper right cover and
the middle right cover.
[2]
[3]
[4]
1
2
MX-FNX2/AR-PN1/MX-RBX1 DISASSEMBLY AND ASSEMBLY 6 – 2
(7) Removing the Saddle Guide
1)
Remove the delivery tray. (See (1).)
2)
Remove the front cover. (See (2).)
3)
Remove the rear cover. (See (3).)
4)
Free the delivery tray support plate (front) [1] and the delivery
tray support plate (rear) [2] to the outside from the rail grooves.
5)
Remove the four screws [3].
[3]
[2]
[3]
6)
Shift the side guide [4] lightly to the front, and free the engage-
ment of the paper surface detecting lever (rear) [5]; then,
detach the side guide [4].
[5]
NOTE: Be sure to mount the side guide after securely fitting the
paper surface detecting lever (rear) [5] in the groove of the
paper surface detecting lever (middle) [6].
After completion of mounting, push the paper surface
detecting lever several times to make sure that side guide
is mounted securely.
[5]
[5]
[3]
[1]
[3]
[4]
[6]
[6]
Advertisement
Chapters
