Advertisement
(9) Feed Roller
1)
Remove the upper cover. (See A.(4).)
2)
Remove the upper right cover assembly. (See A.(6).)
3)
Remove the feed motor unit. (See B.(6).)
4)
Remove the screw [1].
5)
Remove the stop ring [2], and detach the bushing [3].
[1] [3]
[2]
6)
Remove the two screws [4].
7)
Remove the gear [5], and detach the gear [6] while spreading
the claw.
8)
Remove the stop ring [7], and detach the bushing [8].
9)
Remove the screw [9], and detach the inlet sensor [10].
10) Remove the lower paper guide [11].
[11]
[4]
[5]
[8]
[9]
[10]
[6]
[7]
MX-FNX2/AR-PN1/MX-RBX1 DISASSEMBLY AND ASSEMBLY 6 – 8
11) Remove the feed roller [12].
(10) Stack Delivery Roller (Upper)
1)
Remove the paddle assembly. (See B.(4).)
2)
Place the paddle assembly [1] as shown.
3)
Turn the gear [2] in the direction of the arrow to move up the
stack delivery roller assembly (upper) [3].
[3]
4)
Push up the stack delivery roller (upper) [4] from below to free
the stack deliver roller (upper) [4] from the shaft [5].
[12]
[1]
[2]
[4]
[5]
Advertisement
Chapters
