Batch & Single User Creation; Steps On Adding Single User; Figure 6: Create User Extension - Extensions - Grandstream Networks UCM6 Series Basic Configuration Manual

allows up to 5299 extensions to assign to users. Users can configure any extension range as they desire. Here
we've configured it to use four-digit extensions with a leading 1.
Click Save and then Apply Changes at the top so that our extension range will be ready for the next steps.
Batch & Single User Creation
So now that there are extension ranges configured, we can now begin creating users to prepare for the
provisioning process. There are two methods of creating a user. One method would be creating a single user.
The other method would be creating a batch of users.

Steps on Adding Single User

1. Navigate to Extension / Trunk  Extensions. For first time setups users will see "No Data".
Figure 6: Create User Extension – Extensions
2. Click on "Add"
3. Choose Create New SIP Extension.
4. On the "Create New SIP Extension" screen, users can enter in quite a few options, but they are not required
for this tutorial. Click "Save" at the bottom of the page.
P a g e | 8
UCM6XXX Basic Configuration Guide