Subscribe to Our Youtube Channel
Related Manuals for Creative Play CH136
Summary of Contents for Creative Play CH136
- Page 1 TIMBER CRAWL TUNNEL Assembly Instructions NOTES: REVISED 05.02.13 REF: CH136 - TIMBER CRAWL TUNNEL pg 1 of 9...
-
Page 2: Parts Required
(timber 3 holes) (hex board floor) TCT2 (includes end cap) (End Caps) (M12 Nylocs) (torktainers 29mm thickness required) (M12 200 cup square hex) (M12 130 cup square hex) (support ring) pg 2 of 9 REF: CH136 - TIMBER CRAWL TUNNEL... -
Page 3: Foundation Details
Foundation Details SOIL (150mm) TIMBER SUPPORT POST CONCRETE pg 3 of 9 REF: CH136 - TIMBER CRAWL TUNNEL... - Page 4 Construct the assembly BEFORE laying concrete steps Bolt TCT1 & TCT2 Timbers together Using M12 200 cup square hex *DO NOT fully tighten the nuts Repeat the process for the remaing timbers pg 4 of 9 REF: CH136 - TIMBER CRAWL TUNNEL...
- Page 5 Assembly Instructions Fit support ring & hex floor at either end of the tunnel Using M12 130 cup square hex The support ring will overhang the timber 10mm pg 5 of 9 REF: CH136 - TIMBER CRAWL TUNNEL...
- Page 6 If the holes do not line up the central TCT1 & TCT2 assem- bly may need to be rotated Having ensured all the holes line up tighten all bolts / nuts for the TCT1&TCT2 timbers, Support rings and hex floor pg 6 of 9 REF: CH136 - TIMBER CRAWL TUNNEL...
- Page 7 REVISED 05.02.13 - T3 & T4 timber slats OVERHANG the METAL RING 10mm support ring T3 Timber-6 hole torktainer Attach ‘T3 timber - 6 hole’ torktainer nut to the support ring Using torktainers pg 7 of 9 REF: CH136 - TIMBER CRAWL TUNNEL...
- Page 8 Repeat the process for the 2nd ‘T3 timber - 6 hole’ *The main assembly is now complete - concrete foundations can now be laid Using torktainers attach the ‘T4 timber - 3 holes’ to the support rings pg 8 of 9 REF: CH136 - TIMBER CRAWL TUNNEL...
- Page 9 Dimensions pg 9 of 9 REF: CH136 - TIMBER CRAWL TUNNEL...
Need help?
Do you have a question about the CH136 and is the answer not in the manual?
Questions and answers