Operating The Dishwashing Machine; Basic Safety Measures For Standard Operation - Meiko UPster K Operating Instructions Manual

CAUTION!
9726766
Electrical connection

Retighten all electrical terminals in the electrical cabinet; check that electrical
plug-in conncetions are firmly seated.

Check all motors for correct sense of direction.

Carry out a visual check on all electrical equipment (e.g. switches, cables,
housings, covers).

Carry out functional tests on all electrical switches.
Machine interior
Ensure that there are no foreign bodies inside the machine (e.g. cleaning rags, loose
bolts/washers/nuts, tools, packaging materials etc.).
Caution!
Safeguard smooth transitions in areas where moving parts move past fixed parts
(e.g. guide rail, water guiding plate, etc.)
Make sure that all wash pipes, wash systems, final rinse arms, sieves, tank covers
and drain filters as well as flaps have been connected to the input and output. Ensure
that all the parts are correctly installed!
9

Operating the dishwashing machine

9.1

Basic safety measures for standard operation

The installation may only be operated by trained and authorized persons who are familiar
with the operating instructions and who are capable of working in accordance with them!
Ensure the following before switching on the installation:
 Exclusively authorized and instructed persons are within the work zone of the
installation.
 Nobody could be injured by stetting the dishwashing machine into operation.
Before commissioning, each time
 Inspect the installation for any visible damage and ensure that it will only be op-
erated in a perfect condition!
Report any defects to the foreman immediately!
Remove material/objects from the installation's work zone which are not required
to operate the installation!
 Check and ensure that all the safety equipment is operating perfectly!
22 / 40