Table of Contents
Advertisement
Installation
The MP1100 can be placed upright on a table or
shelf, standing on its four feet. It also can be custom
installed in a piece of furniture or cabinet of your
choice. The four feet may be removed from the bottom
of the MP1100 when it is custom installed as out-
lined below. The four feet together with the mounting
screws should be retained for possible future use if the
MP1100 is removed from the custom installation and
used free standing. The required panel cutout, ventila-
tion cutout and unit dimensions are shown.
Always provide adequate ventilation for your
MP1100. Cool operation ensures the longest possible
operating life for any electronic instrument. Do not
install the MP1100 directly above a heat generating
component such as a high powered amplifier. If all
the components are installed in a single cabinet, a
quiet running ventilation fan can be a definite asset in
maintaining all the system components at the coolest
possible operating temperature.
A custom cabinet installation should provide the
following minimum spacing dimensions for cool
operation.
Allow at least 6 inches (15.2cm) above the top, 2
inches (5.1cm) below the bottom and 1 inch (2.5cm)
on each side of the Preamplifier, so that airflow is not
obstructed. Allow 18-1/2 inches (47.0m) depth behind
the front panel. Allow 1-7/16 inch (3.7cm) in front of
the mounting panel for knob clearance. Be sure to cut
out a ventilation hole in the mounting shelf according
to the dimensions in the drawing.
MP1100 Front Panel
Custom Cabinet Cutout
Cabinet Front Panel
Cabinet
Front
Panel
Opening
for Ventilation
MP1100 Side View
in Custom Cabinet
Support
Shelf
MP1100 Bottom View
15
-1/16
in Custom Cabinet
38.3cm
1
"
-1/8
Note: Center the cutout Horizontally
2.9cm
on the unit. For purposes of
clarity, the above illustration
is not drawn to scale.
17-
"
3/16
43.66cm
Opening for Ventilation
Cutout Opening for Custom Mounting
6"
15.2cm
Cutout Opening
for Ventilation
2-
"
7/8
7.3cm
8
"
-1/8
23.2cm
"
13
"
-1/8
Cutout
33.3cm
Opening
for
Ventilation
12
"
-5/16
31.3cm
Installation
10-
"
3/4
27.3cm
Chassis
Spacers
15
"
-1/16
39.6cm
7
Advertisement
Table of Contents
