Table of Contents
Advertisement
Installation
It is recommended that the MCC82 and any associated mo-
bile audio equipment be installed by a professional who is
skilled in all aspects of installation and operation.
Always provide adequate ventilation for the MCC82.
Be sure to provide at least 1 inch clearance at the sides of
the heatsinks. The amplifier can be mounted vertically or
horizontally and may be located under a seat if adequate
clearance is available. The preferred installation method is
to mount the amplifier directly to the vehicle main frame
using the hardware supplied with the amplifier.
Remove End
Cap Screw
Top View of
the MCC82
Remove End
Cap Screw
Side View of
the MCC82
All manuals and user guides at all-guides.com
Remove Top Panel Screws
Remove Top Panel Screws
It is not recommended that the amplifier not be mounted
under the hood or in a location where it will be directly ex-
posed to the elements. The openings in the side vents can
be damaged by exposure to water, chemicals or any form
of road dust or debris.
To access the connecting terminals, remove the screws
holding the gold end caps on both sides of the amplifier
and lift the end caps off. The Top Panel Controls and
Switches are accessible by removing the Top Panel by re-
moving the four screws and carefully lifting off the top
panel.
Installation
Remove End
Cap Screw
Remove End
Cap Screw
5
Advertisement
Table of Contents
