Table of Contents
Advertisement
SECTION 2
FIGURE 3.3
Rear wall
(1) chute slide gate, (2) chute, (3) lever, (4) locking bolt
In order to enable very precise unloading of loose materials there is a slide opening placed in
the rear side (1) – figure (3.3), which is raised using lever (3). When in upper position and
also during transport the slide must be secured by tightening the locking screw (4). The trailer
can be additionally equipped with the rear chute and the system of side chutes that enable
unloading material outside the area of the trailer's wheels.
3.2.3 MAIN BRAKE
The trailer is equipped with one of four types of main brake:
• double conduit pneumatic braking system with three position regulator, figure
(3.4),
• single conduit pneumatic braking system with three position regulator, figure (3.5),
• double conduit pneumatic braking system with automatic regulator, figure (3.6),
•
hydraulic braking system, figure (3.7).
3.7
Pronar T680
Advertisement
Table of Contents
