Eastwood B100 Instructions Manual page 9

MOUNT PICK-UP TUBE/BLAST GUN/HOSE (G)
• Place the end of the Pickup Tube (G) at the bottom right of
the Hopper section of the Cabinet (A), Align the mount-
ing holes of the bracket with the 2 holes in the right front
Hopper panel and secure it with 2 M6 Screws and Nuts
(FIG 14).
• Slip the end of the Orange Air Supply Hose over the inner
nipple of the 90° Bulkhead Fitting and secure it with the
Compression Ring (FIG 15).
To order parts and supplies: 800.343.9353 >> eastwood.com
FIG. 14
FIG. 15
9