ADD FLUORESCENT TUBES (E) TO LIGHT FIXTURE (D)
GLASS PANEL TO TOP OF CABINET LOCATION (D & F TO A)
• Place the Light Fixture on its back and remove the
Florescent Tubes (E) from packaging.
• Align contact pins at the end of Fluorescent Tubes with the
spring-loaded lamp receptacles (FIGS 9 & 10), push in,
and allow pins at opposite end of Tube to fit into opposite
receptacle.
To order parts and supplies: 800.343.9353 >> eastwood.com
FIG. 9
FIG. 10
7