Table of Contents
Advertisement
Installation
This chapter describes how to install and connect your Comtrend GS-7405 Switch. Read the following topics and perform the
procedures in the indicated order. Incorrect installation may cause damage to the product.
Placement Tips
•
Ambient Temperature - To prevent the switch from overheating, do not operate it in an area that exceeds an ambient
temperature of 122°F (50°C).
•
Air Flow - Assure that there is adequate air flow around the switch.
•
Mechanical Loading - Assure that the switch is level and stable to avoid any hazardous conditions.
•
Circuit Overloading – Avoid powering the switch from an overloaded power circuit.
Desktop Installation
To place the switch on a desktop:
1.
Install the four foot pads (included) on the bottom of the switch.
2.
Place the switch on a flat surface.
Desktop Installation
9
Advertisement
Table of Contents
