Installation; Placement Tips; Desktop Installation - Comtrend Corporation GS-7608 User Manual

2. Installation

This chapter describes how to install and connect your Comtrend Switch. Read the
following topics and perform the procedures in the correct order. Incorrect installation
may cause damage to the product.
All models are designed for desktop use, however, the GS-7608 is available with a
rackmount kit.

2.1. Placement Tips

• Ambient Temperature—To prevent the switch from overheating, do not operate it
in an area that exceeds an ambient temperature of 122°F (50°C).
• Air Flow—Be sure that there is adequate air flow around the switch.
• Mechanical Loading—Be sure that the switch is level and stable to avoid any
hazardous conditions.
• Circuit Overloading—Adding the switch to the power outlet must not overload
that circuit.

2.2. Desktop Installation

To place the switch on a desktop:
1. Install the four rubber feet (included) on the bottom of the switch.
2. Place the switch on a flat surface.
Installation
Figure 11 - Desktop Installation
8