Step 9
6 x Cam Bolts
(H1)
Phillips Head
Screwdriver
Insert 6 x Dowels (H3) into Top Panel (P2) and secure 6 x Cam Bolts (H1) to Top Panel (P2)
by tightening with the Phillips Head Screwdriver.
Step 10
6 x Cam Nuts
Phillips Head
(H2)
Insert 6 x Cam Nuts (H2) into Side Panels (P4x2) and Divider Panel (P5) as shown.
Rotate the cam nuts so the arrows point towards the incoming cam bolts. Attach Top Panel (P2) to
Side Panels (P4x2) and Divider Panel (P5) by tightening the cam bolts with the Phillips Head Screwdriver.
6 x Dowels
(H3)
Screwdriver
(P2)
PAGE9