Advertisement
Step 3
4 x Cam Bolts
4 xDowels (H3)
(H1)
Phillips Head
Screwdriver
Insert 2 x Dowels (H3) into Side Panel (P4) and secure 2 x Cam Bolts (H1) to Side Panel (P4)
by tightening with the Phillips Head Screwdriver.
Repeat steps for second Side Panel (P4).
Step 4
4 x Cam Nuts
Phillips Head
(H2)
Screwdriver
Insert 4 x Cam Nuts (H2) into Shelf Panel (P1) as shown. Rotate the cam nuts so the arrows point towards
the incoming cam bolts. Attach Side Panels (P4x2) to Shelf Panel (P1) by tightening the cam bolts with the
Phillips Head Screwdriver.
PAGE6
Advertisement
