Frequently Asked Questions; The Display Indicates Messages Or Faults - Miele TXI 680 WP Operating Instructions Manual

Frequently Asked Questions

With the help of the following guide, minor faults in the performance of the
machine, some of which may result from incorrect operation, can be remedied
without contacting the Service Department. This will save you time and money
because you won't need a service call.
This guide may help you find the reason for the fault and help you correct it.
Some of the messages in the display are more than one line long. Touch the  or
 sensor button to read them in full.

The display indicates messages or faults

Message
000 lights up after
switching on.
End/Cooling down

Clean plinth filter.
See  lights up
at the end of a
program.
56
Possible cause and solution
Access via a PIN code has been activated.
 Enter the code and confirm the entry. Deactivate
the PIN code if you do not wish this message to
appear in the display the next time the machine is
switched on.
The laundry will be cooled down at the end of the
program.
 Either remove the laundry and spread it out to cool
down or leave it in the tumble dryer to cool down
during the cooling phase.
The tumble dryer is not working correctly or
economically. Possible causes could be clogging
caused by lint or detergent residue.
 Please see "Cleaning and care" for notes on
cleaning.
 Clean the lint filters.
 Also check the plinth filter and clean it if
necessary.
 To switch off the message: press
You can influence when the
message lights up.
 To do this, follow the instructions in "Settings –
Airway indicator".
OK .
Clean plinth filter. See 