Cleaning the plinth filter
Clean the plinth filter when the
program duration has been extended
or when this message appears in the
display:
Clean the lint and plinth filters.
See the Operating Instructions for more
information.
To delete the message:
Confirm with
OK
Removing the plinth filter
Press the round, indented area on the
heat exchanger access panel to open
it.
The flap will spring open.
.
Cleaning and care
Pull the plinth filter out by the handle.
The right-hand guide pin comes out
when the plinth filter is removed. The
guide pin prevents the flap from closing
without the plinth filter.
53