Miele TXI 680 WP Operating Instructions Manual page 11

Heat-pump dryer
Hide thumbs Also See for TXI 680 WP:
Table of Contents

Advertisement

Do not change the plug: If it does not fit into the socket, you
should have a proper outlet installed by a qualified electrician.
In the event of a fault or during cleaning and maintenance, the
tumble dryer is only completely disconnected from the electricity
supply when the tumble dryer plug has been removed or if the fuse
has been disconnected or if the screw-out fuse has been removed.
Do not switch on the supply until the task has been completed.
Miele tumble dryers and Miele washing machines can be installed
as a washer-dryer stack. A Miele washer-dryer connection kit is
required as an optional accessory for this. Please ensure that the
washer-dryer connection kit is suitable for the Miele tumble dryer
and the Miele washing machine.
If you order a plinth for this tumble dryer (available from Miele as
an optional accessory), make sure it is the correct one.
The maximum dry laundry weight is 8,0 kg.
See the "Program chart" for the maximum recommended loads for
individual programs.
Do not place shoes inside the drum for drying. Placing shoes
inside the drum for drying can cause the belt to tear, requiring a
service call.
You must always use the dryer basket (optional accessory) when
drying/airing shoes. Follow the additional operating instructions for
the dryer basket.
This tumble dryer is supplied with a special lamp to cope with
particular conditions (e.g. relating to temperature, moisture, chemical
resistance, abrasion resistance and vibration). This special lamp
must only be used for the purpose for which it is intended. It is not
suitable for room lighting. Replacement lamps may only be fitted by
a Miele authorized person or by Miele Customer Service.
WARNING AND SAFETY INSTRUCTIONS
11

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents