QualGear QG-PRO-PM-TCA-B Installation Manual

Installing the Ceiling Adapter to the Truss
TYPES OF TRUSS
(B)
3"
(A)
17mm
Position "U" bolts (B) over truss, and attach adapter plate (A) with the
hex nuts (E), washers (C,D) and tighten using a 17mm socket wrench.
Max. Diameter: 3"
Joining the Pipe to the Ceiling Adapter
3"
Connect this 1.5" NPT
pipe end to the ceiling plate
3 ½"
Max. 3" wide by 3 ½" tall
3"
3 ½"
To secure the position of the
Max. 3" wide by 3 ½" tall
pipe, tighten screws (F or G)
with allen key (H).
IMPORTANT!
Do not loosen screws all the way when making adjustments, this will disconnect the
parts and may cause injury or property damage.
Truss
Washers (C)
Washers (D)
Hex Nuts (E)
Alley Key
(H)
(F) x 2
(G) x 2
1.5" NPT Pipe
(not included)
QG-PRO-PM-TCA-B
CAUTION!
181kg
Do not exceed the maximum rated weight
(400lbs)
specified. Otherwise, serious injury or
RATED
property damage may occur.
5 Year Limited Warranty
5 Year Limited Warranty
Version November 2015 Version November 2015