Power Supply - Essilor Instruments Vision-C 600 User Manual

Do not try to repair or modify the instrument.
Never try to perform any repairs inside the instrument yourself. In the event of malfunctions,
consult your dealer.
To avoid any risk of electrocution, do not open the cover. Consult your dealer for all repairs.
Any serious incident that has occurred in relation to the device should be reported to the manufacturer
and the competent authority of the Member State in which the user and/or patient is established.
There is no limit conditions that the device can tolerate.
a. Power supply
WARNING: To avoid the risk of electric shock this device must only be connected to a supply
mains with protective earth.
Take care to use the power cord grounding cable when connecting to the ground terminal.
Do not damage the power cord (by bending it, pulling it or placing heavy objects on top of it,
etc.). Do not modify it either. If the cord is damaged (loose contact, damaged sheath, etc.),
replace it with a new cord. Continued use may result in an electric shock or fire.
Do not touch the power plug with wet hands. This may cause an electric shock.
If you do not use the instrument for an extended period, disconnect the power cord from the
outlet.
Do not use multi-socket power strips, adapters or extension cords to connect the instrument to the
mains.
Make sure the power cord is fully inserted into both the plug and the instrument Failure to insert it
properly may result in a fire or electric shock.
Clean the power cord regularly to avoid dust buildup. If the cord is dirty, it may cause a
malfunction or fire.
If the power cord becomes hot after using the instrument, check that it is not dirty. If it is not,
replace the power cord with a new one. Continued use may cause malfunction or personal injury.
Use the instrument with the appropriate supply voltage. Continued use with a supply voltage
greater than the rated power may cause malfunction or fire.
Hold the plug when you insert or remove the power cord.
Use only the power cord (Us or EUrope) provided with the device, model H05VV-F cord type 3G 10
mm², provided with VIIG plug. SJT 3x18 AWG provided with hospital grade plug Nema 5-15P HF
for US/CAN ; 2 m in lenght.
41 Vision-C 600 - Polarized visual chart system > V1- 02-2021 (VRSQSE)
U > C & W
SER MANUAL AUTIONS ARNINGS