Commissioning; Warning Notices; Commissioning Work - Beko CLEARPOINT 3eco S040 Translation Of Original Installation And Operation Manual

Installation and operation manual

8. Commissioning

8.1 Warning notices

DANGER
DANGER

8.2 Commissioning work

For commissioning to be carried out, the following prerequisites must be fulfilled and the preparatory tasks must have
been completed.
Tools
• none
1. Assembly finished including subsequent leakage test
Automatic discharge
Operation of plant outside the permissible limit range!
Operation of the product and accessories outside the permissible limits and operating
parameters, unauthorised intervention and modifications may result in death or serious
injury.
• Adhere to the limits and operating parameters specified on the type plate and in the
manual.
• Adhere to the installation and ambient parameters.
• Check whether the operating parameters have been amended or restricted by the use of
accessories.
• Adhere to the maintenance intervals.
Pressurised system!
Death or serious personal injury can result through contact with fast or suddenly escaping
compressed gas or through bursting system parts.
• Set up a safety area around the working area during all assembly, installation,
maintenance and repair work.
• Before pressurisation, check all pipe connections and tighten if necessary.
• Slowly pressurise the system.
• Avoid pressure blows and high differential pressures.
Prerequisites
• none
Preparatory tasks
Illustration
Mechanically open
CLEARPOINT
Material
•
1. Set the knurled screw on the float drain
anti-clockwise (left-hand thread) from
"Mechanically open" to "Automatic
discharge"
3eco coalescence filter
®
Protective equipment
None
Description
29 | 56