Troubleshooting - Quell Simline QSP10 Manual

Trouble shooting:
Problem
The red LED does not
flash very 40s
Smoke alarm does not
sound when tested
Low battery warning
Fault warning
Self-test fault warning
False alarm
The alarm sounds
different from it is used to
•
If the unit is out of warranty, please replace with another
new alarm.
Cause and Remedy
•
Make sure the product is
activated
•
Make sure the product is
activated
•
Clean the smoke alarm.
•
The battery is under low battery
status, please replace the smoke
alarm device.
•
Clean the smoke alarm.
•
Press the TEST button at least 15s,
then release.
•
Press the TEST button to silence it.
•
Clean smoke alarm device.
•
Move the smoke alarm device to
new location.
•
Ensure that the battery is not
low voltage.
•
Clean smoke alarm.
14
2