Operation - Quell Simline QSP10 Manual

Operation

Product function description:
Function Indication
Standby The red LED flashes
status every 40 seconds.
Low battery The unit chirps with
warning red LED flashing every
40 seconds.
Fault The unit chirps between
warning the red LED two times
flashing.
Self-test The red LED flashes
fault warning twice every 40 seconds.
Test function The red LED flashes
once every second with
alarm sounding until
the TEST button is
released.
Description
The unit is working.
The battery is under
low battery status,
please replace the
smoke alarm device.
The unit is faulty, get
help from the
section:
"Trouble Shooting".
The buzzer fault or
buzzer detection
circuit fault.
Test by pressing the
l
TEST button on the
smoke alarm at least
3 seconds.
The alarm will sound
l
if all electronic
circuitry, horn and
battery are working
properly.
If no alarm sounds,
l
refer to
"Trouble Shooting"
.
9
2