The Time - Siemens HX9R3AE50 User Manual

a
With the key or @ set the time.
3.
After a few seconds, the device starts to heat up. The
time counts down on the display.
The time has elapsed
A signal sounds. The device no longer heats up. The
display shows the duration at zero.
Once the signal has ended, you can set a new cooking
time with the @ button.
When the dish is ready, switch off the appliance by turning
the function selector knob to the zero position.
Change and abort
a
With key or @ you can change the duration at any
time. The change is accepted after a few seconds.
To cancel the operation, set the cooking time with the
all the way back to zero. The appliance continues to heat
up without any time.
Set end
You can set the time at which the time expires to a later
time. For example, you can place the food in the cooking
compartment in the morning and set it so that it is ready
in the afternoon.
Clues
Make sure that food does not remain in the cooking
■
compartment for too long and that it does not spoil.
Do not set an end if the operation has already
■
started. The cooking result would then no longer be
correct.
Do not set an end if the operation has already
■
started. The cooking result would then no longer be
correct.
The end of the time can be delayed up to 23 hours and
59 minutes.
Example in the picture: It is 10:30 am, the set time is 45
minutes and the dish must be ready at 12:30 pm.
Set heating type and temperature or setting
1.
v
Key press and with key
2.
v
Press once again tip.
3.
The display shows the end time
a
or @ set the time.
y
marked.
With the @ or . button
4.
After a few seconds, the device takes over the settings.
The display shows the end time. As soon as the device
starts, the time will elapse.
The time has elapsed
a
A signal sounds. The device no longer heats up. The
display shows the duration at zero.
Once the signal has ended, you can set a new cooking
time with the @ button.
When the dish is ready, switch off the appliance by turning
the function selector knob to the zero position.
Change and abort
With the key
change is accepted after a few seconds. The end time
cannot be changed when the time expires. The cooking
result would then no longer be correct.
To cancel the program, use the . button to set
the end time all the way back to the current time plus
duration. The appliance starts to heat up and the time
counts down.
Set alarm clock
You can use the alarm clock when the appliance is
switched on and off. However, no duration or end time
must be set.
You can set a maximum of 23 hours and 59 minutes. Up
to 10 minutes, the alarm time can be set in steps of 30
seconds. The higher the value, the greater the time
steps.
Depending on the button you touch first, the alarm time
starts at a different suggested value: 5 minutes at the .
a
button and 10 minutes at the @ button.
Q
Key impressions.
1.
a
delay the end.
a
or @ you can change the end time. The
NL
Time functions
a
21