Singer SVC-17601520-GYTR Instruction Manual page 10

Cleaning the appliance
• Disconnect the appliance from the mains and let it cool before undertaking
any cleaning task.
• Clean the equipment with a damp cloth with a few drops of washing-up
liquid and then dry.
• Do not use solvents or products with an acid or base pH such as bleach
or abrasive products to clean the appliance.
• Do not submerge the appliance in water or any other liquid or place it
under a running tap.
Changing and Cleaning the Dust Cup Filter
In order to achieve the best performance, empty the dust cup container and
clean the dust cup fi lter after each use.
1. Lift the handle (1) from the vacuum cleaner body.
2. Press the dust cup container lock (11) to open the dust cup container
base.
3. Empty the dust from the dust cup container (10).
4. After turning to right the dust cup container (10) you
need to press down the dust cup to remove it.
NOTE: The dust cup container (10) can be removed ONLY
after lifting the handle.
NOTE: To close the dust cup container (10) base push it to
the dust cup container lock (11) and press the lock until the
base fi ts well.
5. Take out the HEPA fi lter to clean it.
Rinse the dust cup fi lter in cold water,
and then let it air dry for 24 hours
before replacing it back in the dust cup
container.
10
ENGLISH