Raymarine i70 Installation Instructions Manual page 73

1. 2 m (6.6 ft) Power cable (straight) (A06049).
2. 2 m (6.6 ft) Elbow (right angled) power cable (A06070).
SeaTalkng ® connectors
SeaTalkng connectors are used to connect SeaTalkng devices to the SeaTalkng backbone and
to create and extend the backbone.
1. 5-Way connector (A06064). Each connector block allows connection of up to 3 SeaTalkng
devices. Multiple connector blocks can be 'daisy chained' together.
2. T-piece (A06028). Each T-piece allows connection of one SeaTalkng device. Multiple T-pieces
can be 'daisy chained' together.
3. Backbone extender (A06030). Used to connect 2 backbone cables together.
4. Inline terminator (A80001). Used to connect a spur cable and SeaTalkng device at the end of a
backbone instead of a backbone terminator.
5. Backbone terminator (A06031). Terminators must be fitted to both ends of the SeaTalkng
backbone.
6. Spur blanking plugs (A06032). Used to cover unused spur connections in 5–way blocks, T-piece
connectors, or the SeaTalk to SeaTalkng converter.
7. Spur connector right angled elbow (A06077). Used in confined spaces where a straight spur
cable will not fit.
SeaTalkng ® adaptors and adaptor cables
SeaTalkng adaptor cables are used to connect devices designed for different CAN bus backbones
(e.g.: SeaTalk or DeviceNet) to the SeaTalkng backbone.
Spares and accessories
73