Raymarine i70 Installation Instructions Manual page 70

1. 2 x 5 m (16.4 ft) Backbone cables (A06036). Used to create and extend the SeaTalkng backbone.
2. 1 x 20 m (65.6 ft) Backbone cable (A06037). Used to create and extend the SeaTalkng
backbone.
3. 4 x T-piece (A06028). Each T-piece allows connection of one SeaTalkng device. Multiple
T-pieces can be 'daisy chained' together.
4. 2 x Backbone terminators (A06031). Terminators must be fitted to both ends of the SeaTalkng
backbone.
5. 1 x 2 m (6.6 ft) Power cable (A06049). Used to provide 12 V dc power to the SeaTalkng backbone.
Evolution autopilot cable kit (R70160)
1. 1 x 5 m (16.4 ft) Backbone cable (A06036). Used to create and extend the SeaTalkng backbone.
2. 1 x 1 m (3.3 ft) Spur cable (A06040). Used to connect device to the SeaTalkng backbone.
3. 1 x 2 m (6.6 ft) Power cable (A06049). Used to provide 12 V dc power to the SeaTalkng backbone.
4. 1 x 5-Way connector (A06064). Each connector block allows connection of up to 3 SeaTalkng
devices. Multiple connector blocks can be 'daisy chained' together.
5. 2 x T-pieces (A06028). Each T-piece allows connection of one SeaTalkng device. Multiple
T-pieces can be 'daisy chained' together.
6. 2 x Backbone terminators (A06031). Terminators must be fitted to both ends of the SeaTalkng
backbone.
SeaTalk to SeaTalkng converter kit (E22158)
70
consists of:
consists of: