Savoy House 26-9536-FD-196 Owner's Manual
  1. Manuals
  2. Brands
  3. Savoy House Manuals
  4. Fan
  5. 26-9536-FD-196
  6. Owner's manual

Savoy House 26-9536-FD-196 Owner's Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
CEILING FAN
OWNER'S MANUAL
READ AND SAVE THESE INSTRUCTIONS
MODEL: 26-9536-FD-196
FAN RATING AC 120V. 60Hz
CUL LISTED MODEL: AC-326DL

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 26-9536-FD-196 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Savoy House 26-9536-FD-196

Summary of Contents for Savoy House 26-9536-FD-196

  • Page 1 CEILING FAN OWNER'S MANUAL READ AND SAVE THESE INSTRUCTIONS MODEL: 26-9536-FD-196 FAN RATING AC 120V. 60Hz CUL LISTED MODEL: AC-326DL...

  • Page 2: Tools And Materials Required

    1. TOOLS AND MATERIALS REQUIRED Philips screw driver Blade screw driver 11 mm wrench Step ladder Wire cutters 2. PACKAGE CONTENTS Unpack your fan and check the contents. You should have the following items: a. Blade set (3) b. Hanger bracket assembly c.

  • Page 3: Safety Rules

    3. SAFETY RULES 1. To reduce the risk of electric shock, ensure Avoid placing objects in the path of the blades. electricity has been turned off at the circuit breaker or fuse box before beginning. 8. To avoid personal injury or damage to the 2.

  • Page 4: Mounting Options

    4. MOUNTING OPTIONS If there isn't an existing cUL listed mounting box, then read the following instructions. Disconnect the power by removing fuses or turning off circuit breakers. Secure the outlet box directly to the building Outlet box structure. Use appropriate fasteners and building materials.
  • Page 5 5. ATTACHING THE UPPER GUARD Hex wrench Step 1 Align the holes from the upper guard Hex wrench screws to the holes from the motor assembly, and secure the upper guard in place with hex Upper guard wrench screw by useing the hex wrench provided.

  • Page 6: Hanging The Fan

    6. HANGING THE FAN Hanger bracket REMEMBER to turn off the power. Follow the steps below to hang your fan properly: Ceiling canopy Step 1. Remove the hanger bracket from the canopy by removing the 1 of 2 screws from the bottom of the hanger bracket and loosening the other one a half turn from the screw head.

  • Page 7: Installation Of Safety Support

    7. INSTALLATION OF SAFETY SUPPORT An additional safety support is provided to Hanger bracket Safety cable prevent the fan from falling. Secure the safety cable to the ceiling joist with screw and washer, as illustrated in Figure 10. Figure 10 8.
  • Page 8 Step 2. (Figure 13) Motor to Receiver Electrical Connections: Connect the black wire from the Outlet box fan to black wire marked "TO MOTOR L". Connect the white wire from the fan to the White (neutral) Black (hot) white wire marked "TO MOTOR N" from the Green or bare copper (ground) Black ("AC IN L")

  • Page 9: Finishing The Installation

    9. FINISHING THE INSTALLATION Outlet box Step 1. Tuck connections neatly into ceiling outlet box. Hanger bracket Step 2. Slide the canopy up to hanger Screws bracket and place the key hole on the canopy over the screw on the hanger bracket, turn canopy until it locks in place at the narrow Canopy section of the key holes.

  • Page 10: Installing The Light Kit

    11. INSTALLATING THE MOUNTINGPLATE 1. Remove the 1 of 3 screws from the mounting ring and loosen the other 2 screws. (Do not remove) 2. Place the key holes on the mounting plate over the 2 screws previously loosened from the mounting ring, turn mounting plate until it locks in place at the narrow section of the Mounting ring...

  • Page 11: Installing The Glass Shade

    13. ATTACHING THE BOTTOM GUARD Place the bottom guard to the top of the motor. Align holes and fasten the bottom Screws guard to the upper guard with eight screws Upper guard provided. (Fig. 18) WARNING: Make sure all screws are tightened securely.

  • Page 12: Installing The Battery

    15. INSTALLING THE BATTERY Insert the 23A/12V battery (included) and make sure they are seated correctly in recess. (Fig. 20) 16. OPERATING Figure 20 INSTRUCTIONS Restore power to ceiling fan and test for proper operation. , and buttons: These three buttons are used to set the fan speed as follows: = high speed = medium speed...

  • Page 13: Care Of Your Fan

    The Reverse switch is located on the motor housing. Slide the switch to the Left for warm weather operation. Slide the switch to the Right for cool weather operation. Speed settings for warm or cool weather depend on factors such as the room size, ceiling height and number of fans.

  • Page 14: Troubleshooting

    18. TROUBLESHOOTING Problem Solution Fan will not start. 1. Check circuit fuses or breakers. 2. Check line wire connections to the fan and switch wire connections in the switch housing. CAUTION: Make sure main power is off. 3. Check to make sure the dip switches from the transmitter and receiver are set to the same frequency.

Table of Contents