Memory Call System Using The Electronic Key - Toyota AURION Owner's Manual

OCCUPANT RESTRAINT SYSTEMS
You can stop the movement into a
D
memorised driving position by press-
ing another driving position memory
switch.
52
—Memory call system using the
electronic key
When the driver's door is opened, you can
recall the memorised position using the
wireless remote control function or the
entry function of the smart entry and start
system.
This function can be used after setting the
driving position by following procedure.
LINKING THE DRIVING POSITION TO THE
ELECTRONIC KEY
A driving position memorised in button "1" or
"2" can be linked to an electronic key.
The driver's door must be closed with the
ignition switch turned off.
1. Press and hold the previously memo-
rised driving position button "1" or
"2".
2. While depressing the button above-
mentioned, press and hold the lock or
unlock button on the electronic key
until a beep sounds.
If you want to set other driving position, re-
peat the above procedure. The previous set-
ting will be erased and the new position will
be set.