DO-IT-YOURSELF MAINTENANCE -- ELECTRICAL COMPONENTS
3. Install a new bulb and plug the connec-
tor into the mounting hole. Install the
back cover and turn it clockwise.
Aiming is not necessary after replacing the
bulb. When aiming adjustment is necessary,
contact your Toyota dealer.
276
—Headlights (high beam)
1. Turn the back cover counterclockwise
and remove it. Turn the bulb base coun-
terclockwise to the front of the vehicle
as shown.
2. Unplug the connector while depressing
the lock release.
If the connector is tight, wiggle it.