Automatic High Beam (Vehicles With Discharge Headlights) - Toyota Venza 2011 Manual

2-3. Operating the lights and wipers

Automatic High Beam (vehicles with discharge headlights)

The Automatic High Beam uses an in-vehicle camera sensor to
assess the brightness of streetlights, the lights of oncoming and
preceding vehicles, etc., and automatically turns high beam on or off
as necessary.
■
Activating the Automatic High Beam system
202
VENZA_U (OM73012U)
Push the lever away from you
with the headlight switch in
position
"ENGINE START
switch is in IGNITION ON
mode (vehicles with smart key
system) or the engine switch
is in the "ON" position (vehi-
cles without smart key sys-
tem).
The Automatic High Beam indi-
cator will come on when the
headlights are turned on auto-
matically to indicate that the
system is active.
when the
STOP"