Richell 94951 Instruction Manual page 4

⑤ Secure the Top Door Frame and the Bottom Door Frame
with the Bolts at 8 locations.
4
Assemble the Outer Frame
① Lay the Outer Frame flat as shown in the figure below.
Top Outer Top Outer Top Outer
Frame Frame Frame
② Insert the Connection of the Bottom Outer Frame into the Top Outer Frame completely.
Top Outer Frame Top Outer Frame Top Outer Frame
③ Secure the Top Outer Frame and the Bottom Outer Frame with Bolts at 8 locations.
5
Assemble the Extension
① Connect the Extensions by turning one of them in the direction of arrow and
attach necessary parts to the Adjuster Bolts.
②Prepare parts in accordance with the Preparation of Parts'
③Insert the Adjuster Bolt into the Hole located on the side of the Frame.
Bottom Outer Bottom Outer Bottom Outer
Connection Connection Connection
Frame Frame Frame
Connection Connection Connection
Bottom Outer Frame Bottom Outer Frame Bottom Outer Frame
※If the Bolt cannot be inserted smoothly, adjust the
insertion of Connection by standing the Frame.
※Before assembling the product, please check required quantity of parts listed
in the Preparation of Parts section.
Top Outer Frame Top Outer Frame Top Outer Frame
Hole Hole Hole
Place the Outer Frame Place the Outer Frame Place the Outer Frame
with Holes visible. with Holes visible. with Holes visible.
※Adjust the length of the Adjuster and set the
width narrower than installation location.
4
Bottom Outer Frame Bottom Outer Frame Bottom Outer Frame
Rivet Rivet Rivet
Place the Outer Frame Place the Outer Frame Place the Outer Frame
with Rivet visible. with Rivet visible. with Rivet visible.