Richell 94951 Instruction Manual page 8

●
Release the Lock by turning the Locking Member to a vertical position and open the Door.
Turn the Locking Member to a horizontal position after close the Door.
Release Lock
Open
●
Wipe off this product with washing cloth after squeezed firmly using a mild detergent and water. After cleaning,
place the product in a shaded area to air dry to prevent discoloration, warping, rust and mold.
●
Do not use a scrub brush and/or a polishing powder as these may cause scratches, rust and/or discoloration to
the product.
●
When using creosol or other disinfectants, make sure to dilute them, otherwise damage to the product finish or
discoloration may occur.
●
Do not use harsh chemicals such as thinner, benzene or alcohol as these may cause discoloration or abrasion
to the finish.
UPC
803840 94951 1
Dimension 28.5" - 37.5"W x 3"D x 71.5"H
Outer Frame, Door Frame: Steel / End Cap: Polyacetal / Adjuster Cap: Polypropylene
Material
Locking Member: Nylon / Rubber Foot, Cushioning Material: Silicone rubber /
Extension, Adjuster Knob: Steel, Polypropylene / Adjuster Bolt: Steel, Thermoplastic Elastomer
●
Please note that product specifications and design may change without prior notice for the purpose
of quality improvement.
Lock the Door
8