POSIFLEX CD-3860 User Manual
Hide thumbs Also See for CD-3860:

Advertisement

Quick Links

CD-3860 Bar Code Scanner
User's Manual
Important Notice
No warranty of any kind is made in regard to this material, including, but not limited to,
implied warranties of merchantability or fitness for any particular purpose. We are not
liable for any errors contained herein nor for incidental or consequential damages in
connection with furnishing, performance or use of this material. We shall be under no
liability in respect of any defect arising from fair wear and tear, willful damage,
negligence, abnormal working conditions, failure to follow the instructions and warnings,
or misuse or alteration or repair of the products without written approval. No part of this
document may be reproduced, transmitted, stored in a retrieval system, transcribed, or
translated into any human or computer or other language in any form or by any means
electronic, mechanical, magnetic, optical, chemical, biological, manual or otherwise,
except for brief passages which may be quoted for purposes of scholastic or literary
review, without express written consent and authorization. We reserve the right to make
changes in product design without reservation and without notification. The material in
this guide is for information only and is subject to change without notice. All trademarks
mentioned herein, registered or otherwise, are the properties of their various, ill,
assorted owners.
General Handling Precautions
Do not dispose of the scanner in fire.
Do not put the scanner directly in the sun or by any heat source.
Do not use or store the scanner in a very humid place.
Do not drop the scanner or allow it to collide violently with other objects.
Do not take the scanner apart without authorization.
Printing Guidance
This programming guide is in A5 size. Please double check your printer setting before
printing it out.
When barcodes are to be printed out for programming, the use of a high-resolution laser
printer is strongly suggested for the best scan result.
Copyright © 2010. All rights reserved.
1
All manuals and user guides at all-guides.com
1
Rev. Original

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the CD-3860 and is the answer not in the manual?

Questions and answers

Summary of Contents for POSIFLEX CD-3860

  • Page 1 All manuals and user guides at all-guides.com CD-3860 Bar Code Scanner User’s Manual Rev. Original Important Notice No warranty of any kind is made in regard to this material, including, but not limited to, implied warranties of merchantability or fitness for any particular purpose. We are not liable for any errors contained herein nor for incidental or consequential damages in connection with furnishing, performance or use of this material.
  • Page 2: Table Of Contents

    All manuals and user guides at all-guides.com For CE-Countries This scanner is in conformity with CE standards. Please note that an approved, CE-marked power supply unit should be used in order to maintain CE conformance. Table of Contents About This Guide ......................3 Introduction to Scanner Configuration...............3 Default Parameters.....................4 Scanner Operation................4...
  • Page 3: About This Guide

    All manuals and user guides at all-guides.com About This Guide This programming guide applies to various handheld scanners, including * Advanced Handheld Contact CCD Scanner, * Advanced Middle-Range Handheld CCD Scanner, Some settings are not available for certain models. If you are not sure about the model of your scanner at hand, refer to the device label or contact your distributor.
  • Page 4: Default Parameters

    All manuals and user guides at all-guides.com Default Parameters This table gives the default settings of all the programmable parameters. The default settings would be restored whenever the scanner reads the "Reset" programming label in programming mode. If you wish to change any setting, scan the appropriate barcodes below.
  • Page 5: Symbologies

    All manuals and user guides at all-guides.com Symbologies Parameter Default Decoder Selection EAN/UPC Enable Code 39 Enable Code 32 Disable Codabar Enable ITF 2 of 5 Enable Disable Chinese Post Code Disable Code 93 Enable Code 128 Enable EAN-128 Disable Telepen Disable Code 11...
  • Page 6: Data Formating

    All manuals and user guides at all-guides.com GS1 DataBar Expanded identifier code PDF417 identifier code Barcode Length Codabar maximum Code 11 Standard 2 of 5 minimum Industrial 2 of 5 Matrix 2 of 5 Code 39 maximum Code 93 minimum Code 128 maximum Chinese Post Code...
  • Page 7: Programming Procedure

    All manuals and user guides at all-guides.com Programming Procedure Below is the programming procedure by using barcodes in this guide. 1. Power up the scanner. Scan the Start of Configuration barcode. Scan the barcode for the desired feature. Multiple features can be enabled/disabled before scanning the End of Configuration barcode.
  • Page 8: Parameter Setting

    All manuals and user guides at all-guides.com Parameter Setting Start Of Configuration Scanner Operation System Function Setting Barcode Barcode Label Description Value Reset (return to factory default) Display firmware version Abort :exit programming mode with no update KE94 Return to customer default KE95 Save as customer default End Of Configuration...
  • Page 9 All manuals and user guides at all-guides.com Start Of Configuration Interface Setting Barcode Barcode Label Description Value KE97 Return to USB default KE99 Return to RS-232 default KE87 Enable USB virtual COM (Virtual COM driver required. For installation steps refer to Appendix 1.) KE01 Enable IBM PC/AT/PS/2 Keyboard emulation...
  • Page 10 All manuals and user guides at all-guides.com Start Of Configuration General Scan Mode Setting Handheld Operation Barcode Barcode Label Description Value SM01 Trigger Mode The scanner becomes inactive as soon as the data is transmitted. It must be triggered to become active again.
  • Page 11 All manuals and user guides at all-guides.com Stand Operation Barcode Barcode Label Description Value SM20 IR On (Auto scan on stand) The scanner automatically activates scans and transmits data when detecting object. SM21 IR Off (Scan by manual trigger) End Of Configuration Start Of Configuration Operation Function Setting Good Read Beeper Tone Selection...
  • Page 12 All manuals and user guides at all-guides.com GR11 Medium (50 msec) GR10 Long (100 msec) GR14 Very Long (200 msec) GR15 Ultra long (500 msec) End Of Configuration Start Of Configuration Beeper Volume Selection Barcode Barcode Label Description Value GR20 Loud GR21 Medium...
  • Page 13 All manuals and user guides at all-guides.com LB01 LED/Beep before transmission Use this barcode to indicate a “good read" before successfully transmitting the barcode data to the host. Power-on tone enable LB03 LB04 Power-on tone disable End Of Configuration Start Of Configuration Inter Message Delay Barcode Barcode Label...
  • Page 14 All manuals and user guides at all-guides.com IC03 20ms IC04 50ms IC05 End Of Configuration Start Of Configuration Same Code Delay Barcode Barcode Label Description Value SD01 Same code delay time 50msec SD02 Same code delay time 100msec SD03 Same code delay time 200msec SD04 Same code delay time 300msec SD05...
  • Page 15 All manuals and user guides at all-guides.com SD10 Same code delay time 900msec SD11 Same code delay time 1000msec SD12 Same code delay time Infinite End Of Configuration Start Of Configuration Connection to an Omnidirectional Scanner Instead of connecting to a host, sometimes the handheld scanner is to be connected to the AUX port of an omnidirectional scanner and transmit data to the host system via this omnidirectional scanner.
  • Page 16: Interface Configuration

    All manuals and user guides at all-guides.com Not all firmware versions support the AUX function. Please contact your distributor if you have any questions. End Of Configuration Start Of Configuration Interface Configuration RS-232C Interface Setting Same Code Delay Barcode Barcode Label Description Value BR09...
  • Page 17 All manuals and user guides at all-guides.com End Of Configuration Start Of Configuration Parity Bit Barcode Barcode Label Description Value PB01 Even parity PB02 Odd parity PB03 Mark parity PB04 Space parity PB05 None parity Stop Bit Barcode Barcode Label Description Value SB01...
  • Page 18 All manuals and user guides at all-guides.com DB07 7 data bit DB08 8 data bit End Of Configuration Start Of Configuration Handshaking Protocol Barcode Barcode Label Description Value HP01 None handshaking HP02 ACK/NAK HP03 Xon/Xoff HP04 RTS/CTS LB07 Enable BEEPER ON<BEL> CHARACTER LB08 Ignore BEEP ON <BEL>...
  • Page 19 All manuals and user guides at all-guides.com RT07 ACK/NAK response time infinity End Of Configuration Start Of Configuration Message Terminator Barcode Barcode Label Description Value DT11 RS-232 message terminator—none DT12 RS-232 message terminator—CR/LF DT13 RS-232 message terminator—CR DT14 RS-232 message terminator—LF DT15 RS-232 message terminator—H-tab DT16...
  • Page 20 All manuals and user guides at all-guides.com End Of Configuration Start Of Configuration Keyboard Wedge and USB Interface Setting Language Support Barcode Barcode Label Description Value KL00 International Keyboard mode (ALT mode) KL01 Keyboard language support - U SA KL02 Keyboard language support -...
  • Page 21 All manuals and user guides at all-guides.com End Of Configuration Start Of Configuration Keyboard Setting Barcode Barcode Label Description Value CP00 Capital lock on CP01 Capital lock off CP05 Function key emulation enable CP06 Function key emulation disable CP18 Send number as normal data CP19 Send number as keypad data CP20...
  • Page 22 All manuals and user guides at all-guides.com End Of Configuration Start Of Configuration Want Emulation Setting Wand emulation is a standard interface but requires special firmware. If needed, please contact your distributor. Barcode Barcode Label Description Value WD01 All barcode will be decoded and transmitted in that symbology WD02 Enable Wand output data format as Code 39...
  • Page 23 All manuals and user guides at all-guides.com End Of Configuration Start Of Configuration Wand Emulation Speed Barcode Barcode Label Description Value WS03 Wand emulation speed---normal WS04 Wand emulation speed---high This option allows the transmission of wand emulation at 300us narrow element width WS05 Wand emulation speed---higher This option allows the transmission of wand...
  • Page 24: The Symbologies

    All manuals and user guides at all-guides.com End Of Configuration Start Of Configuration The Symbologies Codabar Parameter Setting Barcode Barcode Label Description Value RC02 Codabar enable RD02 Codabar disable CB05 Codabar start/stop character transmission - n one CB06 Codabar start/stop character transmission A ,B,C,D -...
  • Page 25 All manuals and user guides at all-guides.com End Of Configuration Start Of Configuration Barcode Barcode Label Description Value CB13 No check character CB14 Validate modulo 16,but don’t transmit CB15 Validate modulo 16 and transmit DC50 Codabar data redundant check=off DC51 Codabar data redundant check=1 DC52 Codabar data redundant check=2...
  • Page 26 All manuals and user guides at all-guides.com End Of Configuration Start Of Configuration Code 39 Parameter Setting Barcode Barcode Label Description Value RC01 Code 39 enable RD01 Code 39 disable RC13 Code 32 enable RD13 Code 32 disable DC00 Code 39 data redundant check=off DC01 Code 39 data redundant check=1 DC02...
  • Page 27 All manuals and user guides at all-guides.com End Of Configuration Start Of Configuration Barcode Barcode Label Description Value 3905 Code 39 check digit calculate and transmit 3906 Code 39 check digit calculate but without transmit 3907 No check character 3908 Code 39 maximum length setting 3909 Code 39 minimum length setting...
  • Page 28 All manuals and user guides at all-guides.com End Of Configuration Start Of Configuration Code 93 Parameter Setting Barcode Barcode Label Description Value RC08 Code 93 enable RD08 Code 93 disable DC30 Code 93 data redundant check=off DC31 Code 93 data redundant check=1 DC32 Code 93 data redundant check=2 DC33...
  • Page 29 All manuals and user guides at all-guides.com End Of Configuration Start Of Configuration Code 128 Parameter Setting Barcode Barcode Label Description Value RC06 Code 128 enable RD06 Code 128 disable RC10 EAN-128 enable RD10 EAN-128 disable DC40 Code 128 data redundant check=off DC41 Code 128 data redundant check=1 DC42...
  • Page 30 All manuals and user guides at all-guides.com End Of Configuration Start Of Configuration Chinese Post Code Parameter Setting Barcode Barcode Label Description Value RC05 Chinese post code enable RD05 Chinese post code disable DC60 Chinese post code data redundant check=off DC61 Chinese post code data redundant check=1 DC62...
  • Page 31 All manuals and user guides at all-guides.com End Of Configuration Start Of Configuration MSI/Plessy Parameter Setting Barcode Barcode Label Description Value RC14 MSI enable RD14 MSI disable DC70 MSI data redundant check= off DC71 MSI data redundant check=1 DC72 MSI data redundant check=2 DC73 MSI data redundant check=3 MS01...
  • Page 32 All manuals and user guides at all-guides.com End Of Configuration Start Of Configuration Code 11 Interface Setting Barcode Barcode Label Description Value RC07 Code 11 enable RD07 Code 11 disable 1101 Code 11 maximum length setting 1102 Code 11 minimum length setting Confirm to save this setting (required for reading full ASCII table and length setting) 1103...
  • Page 33 All manuals and user guides at all-guides.com End Of Configuration Start Of Configuration ITF 2 of 5 Parameter Setting Barcode Barcode Label Description Value RC04 ITF 2 of 5 enable RD04 ITF 2 of 5 disable RC09 IATA code enable RD09 IATA disable DC80...
  • Page 34 All manuals and user guides at all-guides.com End Of Configuration Start Of Configuration Barcode Barcode Label Description Value IT01 ITF 2 of 5 code maximum length setting IT02 ITF 2 of 5 code minimum length setting IT06 ITF 2 of 5 one fixed length setting IT07 ITF 2 of 5 two fixed length setting Confirm to save this setting (required for reading full...
  • Page 35 All manuals and user guides at all-guides.com End Of Configuration Start Of Configuration Standard 2 of 5 Parameter Setting Barcode Barcode Label Description Value RC22 Standard 2 of 5 code enable RD22 Standard 2 of 5 code disable D051 Standard 2 of 5 code maximum length setting D052 Standard 2 of 5 code minimum length setting Confirm to save this setting (required for reading full...
  • Page 36 All manuals and user guides at all-guides.com End Of Configuration Start Of Configuration Industrial 2 of 5 Parameter Setting Barcode Barcode Label Description Value RC21 Industrial 2 of 5 code enable RD21 Industrial 2 of 5 code disable D251 Industrial 2 of 5 code maximum length setting D252 Industrial 2 of 5 code minimum length setting Confirm to save this setting (required for reading full...
  • Page 37 All manuals and user guides at all-guides.com End Of Configuration Start Of Configuration UPC/EAN/JAN Parameter Setting Barcode Barcode Label Description Value RC11 EAN convert to ISSN/ISBN enable RD11 EAN convert to ISSN/ISBN disable RC03 UPC/EAN/JAN enable RD03 UPC/EAN/JAN disable UE01 UPC/EAN/JAN all enable UE02 EAN-8 or EAN-13 enable...
  • Page 38 All manuals and user guides at all-guides.com End Of Configuration Start Of Configuration Barcode Barcode Label Description Value UE10 Add on 5 only UE11 Add on 2 only UE12 Add on 2 or 5 UE13 Force UPC-E to UPC-A format enable UE14 Force UPC-E to UPC-A format disable UE15...
  • Page 39 All manuals and user guides at all-guides.com End Of Configuration Start Of Configuration Barcode Barcode Label Description Value UE23 Transmit EAN-8 check digit enable UE24 Transmit EAN-8 check digit disable UE25 Transmit EAN-13 check digit enable UE26 Transmit EAN-13 check digit disable UE27 Transmit UPC-A leading character enable UE28...
  • Page 40 All manuals and user guides at all-guides.com End Of Configuration Start Of Configuration Barcode Barcode Label Description Value DC12 UPC-A data redundant check=2 DC13 UPC-A data redundant check=3 DC14 UPC-E data redundant check=off DC15 UPC-E data redundant check=1 DC16 UPC-E data redundant check=2 DC17 UPC-E data redundant check=3 DC20...
  • Page 41 All manuals and user guides at all-guides.com End Of Configuration Start Of Configuration UE35 EAN/UPC +add-on mandatory for 978/977 bookland (Supplement requirement, not sent for other) UE38 EAN/UPC +addon mandatory for 978/977 bookland (Supplement requirement, optionally for other) UE42 EAN/UPC +addon mandatory for 491 Japanese bookland (Supplement requirement, not sent for other) UE43...
  • Page 42 All manuals and user guides at all-guides.com End Of Configuration Start Of Configuration Matrix 2 of 5 Parameter Setting Barcode Barcode Label Description Value RC12 Matrix 2 of 5 enable RD12 Matrix 2 of 5 disable D151 Matrix 2 of 5 maximum length setting D152 Matrix 2 of 5 minimum length setting Confirm to save this setting (required for reading full...
  • Page 43 All manuals and user guides at all-guides.com End Of Configuration Start Of Configuration GS1 DataBar Parameter Setting There are 7 kinds of barcodes in the GS1 DataBar family and they are categorized into three groups. Barcode types in the same group use the same barcodes for setting. Group Representative Contents...
  • Page 44 All manuals and user guides at all-guides.com End Of Configuration Start Of Configuration GS1 DataBar Limited (Formally RSS Limited) Barcode Barcode Label Description Value RC16 GS1 DataBar Limited enable RD16 GS1 DataBar Limited disable SS10 Transmit GS1 DataBar Limited check digit SS11 Don’t transmit GS1 DataBar Limited check digit SS12...
  • Page 45 All manuals and user guides at all-guides.com End Of Configuration Start Of Configuration GS1 DataBar Expanded (Formally RSS Expanded) Barcode Barcode Label Description Value RC17 GS1 DataBar Expanded enable RD17 GS1 DataBar Expanded disable SS07 GS1 DataBar Expanded/EAN-128 emulation enable SS06 GS1 DataBar Expanded/EAN-128 emulation disable SS08...
  • Page 46: Data Editing

    All manuals and user guides at all-guides.com End Of Configuration Start Of Configuration Data Editing Identifier Code Barcode Barcode Label Description Value IS00 Disable identifier code IS01 Enable identifier code table as factory standard IS03 Enable identifier code table as AIM standard. CI01 Code 39 identifier code setting CI02...
  • Page 47 All manuals and user guides at all-guides.com Confirm to save this setting (required for reading full ASCII table and length setting) End Of Configuration Start Of Configuration Barcode Barcode Label Description Value CI08 Codabar identifier code setting CI09 Code 128 identifier code setting CI10 Code 93 identifier code setting CI11...
  • Page 48 All manuals and user guides at all-guides.com Confirm to save this setting (required for reading full ASCII table and length setting) End Of Configuration Start Of Configuration Header and Trailer Barcode Barcode Label Description Value CP11 Add code length as header enable (2 digits) Add code length as header disable (2 digits) CP12 Header (Preamble)
  • Page 49: Appendix 1: Usb Virtual Com Driver Installation

    All manuals and user guides at all-guides.com End Of Configuration Start Of Configuration Appendix 1: USB Virtual COM Driver Installation Contact your distributor to get the driver and follow the steps below to enable USB virtual COM port. Connect the handheld scanner and the host (e.g. a PC) with a USB interface cable. Enable USB virtual COM port with programming barcodes on page After the programming, the host would request driver installation.
  • Page 50: Appendix 2: Barcode Length Setting

    All manuals and user guides at all-guides.com Appendix 2: Barcode Length Setting Introduction The length of a barcode is the number of characters it contains, including check digits. As listed in the Default Parameters section, each barcode type has different default length.
  • Page 51: Appendix 3: Full Ascii Code 39 Table

    All manuals and user guides at all-guides.com Appendix 3: Full ASCII Code 39 Table Hexa- Hexa- Code 39 ASCII Code 39 ASCII code code Full ASCII ---NUL Full ASCII ---SI Function key-----“Shift” Full ASCII ---SOH Full ASCII ---DLE Function key-----“Ins” Function key-----“5(num)”...
  • Page 52 All manuals and user guides at all-guides.com Full ASCII Code 39 Table Hexa- Hexa- Code 39 ASCII Code 39 ASCII code code Full ASCII ---RS Full ASCII ---- Function key-----“CTL(L)” Full ASCII ---US Full ASCII ---. Function key-----“ALT(L)” Full ASCII ---SP Full ASCII ---/ Full ASCII ---! Full ASCII ---0...
  • Page 53 All manuals and user guides at all-guides.com Full ASCII Code 39 Table Hexa- Hexa- Code 39 ASCII Code 39 ASCII code code Full ASCII ---< Full ASCII ---K Full ASCII ---= Full ASCII ---L Full ASCII ---> Full ASCII ---M Full ASCII ---? Full ASCII ---N Full ASCII ---@...
  • Page 54 All manuals and user guides at all-guides.com Full ASCII Code 39 Table Hexa- Hexa- Code 39 ASCII Code 39 ASCII code code Full ASCII ---Z Full ASCII ---i Full ASCII ---[ Full ASCII ---j Full ASCII ---\ Full ASCII ---k Full ASCII ---] Full ASCII ---l Full ASCII ---^...
  • Page 55 All manuals and user guides at all-guides.com Full ASCII Code 39 Table Hexa- Code 39 ASCII code Full ASCII ---x Full ASCII ---y Full ASCII ---z Full ASCII ---{ Full ASCII ---| Full ASCII ---} Full ASCII ---~ Full ASCII ---DEL End Of Configuration...

Table of Contents