Using the Built-in Flash
Use the flash according to the guidelines below.
Mode Dial
Flash is open
Flash is closed
1
Raise the flash manually, and
shoot.
Press the
button to switch between
and
(switching does not apply in some
modes).
A flashing red
insufficient light level. In this case, raise the flash before shooting.
However, when shooting with the
indication.
2
When you are not using the flash,
lower the flash down until it
closes.
Setting the Red-eye Reduction Function
Mode Dial
The red-eye reduction lamp fire when the flash is used in dark areas. This
reduces light reflecting back from the eyes and making them appear red.
40
The flash fires with every shot.
The flash will fire automatically.
The flash will not fire.
in the LCD monitor (or viewfinder) indicates
,
, or
mode there is no