Shooting With The Built-In Flash - Canon EOS R50 Instruction Manual

Shooting with the Built-in Flash

Shooting with FE Lock
Using the built-in flash is recommended when the [ ] icon appears in the viewfinder or on
the screen, when subjects in daytime shots are backlit, or when shooting under low light.
1.
Manually raise the flash.
2.
Press the shutter button halfway.
3.
Take the picture.
In Creative Zone modes, shooting with flash is possible whenever the
flash is raised.
[BUSY] is displayed on the screen while the flash is charging.
Confirm that [ ] appears on the screen.
When focus is achieved and you press the shutter button completely,
the flash will fire at all times.
To retract the built-in flash after shooting, push it down with your fingers
until it clicks into place.
147