Setting The Date And Time - Canon PowerShot S2 IS User Manual

Switching Between Shooting and Playback
You can quickly switch between Shooting mode and Playback mode. This
is convenient when you wish to shoot again after checking or deleting an
image immediately after it is shot.
Shooting Mode
Turn the mode lever to
(p. 23).
The camera switches to Playback mode, but the lens does not retract (the
lens will retract if you turn the mode lever to
Shooting Mode
Remove the lens cap and press the shutter button halfway.
Or turn the mode lever to
(p. 23).

Setting the Date and Time

When you turn on the camera the first time, and when the lithium coin-
type battery charge is low, the [Date/Time] menu appears.
Setting the date and time settings does not cause the date/time stamp
to appear on images. For printing images with the date on them, refer
to the Direct Print User Guide or Software Starter Guide.
Replacing the Date Battery (p. 164)
1
Turn the camera on (p. 23), press the MENU button, and
then use the
[ (Setup)] menu.
The [ (Setup)] menu appears.
24
Playback Mode
(Playback) while pressing the release button
Playback Mode
(Rec.) while pressing the release button
button on the omni selector to select the
(Playback) once more).