Attaching Sound Memos To Images - Canon PowerShot S2 IS User Manual

Playback-Advanced Functions

Attaching Sound Memos to Images

In Playback mode (including single image playback, index playback,
magnified playback and the review immediately after shooting in
Shooting mode) you can attach sound memos (up to 60 seconds) to
an image. The sound data is saved in the WAVE format.
1
Press the
The sound memo control panel will display.
2
Use the
(Record) and press the SET button.
The recording starts and the elapsed time is
displayed. Speak towards the microphone of
the camera.
Changing the Sound Mode (p. 68)
To stop playback, press the SET button. To
restart recording, press the SET button again.
You can add as many sound memos as you like until their total time
reaches 60 seconds.
Playing back the Sound Memos
Select . Images with sound memos are displayed with the
(they do not display in No Information display mode).
To stop playback, press the SET button. To restart playback, press the
SET button again. You can adjust the volume with the
Erasing the Sound Memos
Verify that
the SET button.
Use the or
Exiting the Sound Memos Menu
Press the
You cannot attach sound memos to movies.
The "Memory card full" message will display when the memory
card is full and you will be unable to record sound memos to that
card.
button while playing back images.
or button to select
is displayed, select
button to select [Erase] and press the SET button.
button.
Sound Memo Panel
with the or button, and press
Continued on next page
mark
or button.
115
7