Using The Built-In Flash - Canon EOS 250D Advanced User's Manual

Using the Built-in Flash

In indoor, low light, or backlit conditions in daylight, just raise the built-
in flash and press the shutter button to easily take beautiful pictures.
In the <d> mode, the shutter speed (1/60 sec. - 1/200 sec.) will be set
automatically to prevent camera shake.
Before raising the flash, remove any accessories attached to the hot shoe.
z
1
Raise the flash with your fingers.
In Creative Zone modes, shooting with
z
flash is possible whenever the flash is
raised.
While the flash is recharging, "buSy" is
z
displayed in the viewfinder, and [BUSY]
is displayed on the LCD monitor.
2
Press the shutter button halfway.
In the bottom left of the viewfinder,
z
check that the <D> icon is displayed.
3
Take the picture.
When focus is achieved and you press
z
the shutter button completely, the flash
will fire at all times.
169