Locking The Flash Exposure Setting (Fe Lock) - Canon PowerShot S2 IS User Manual

In mode, AE lock can be set or canceled (p. 65).
Automatically selected combinations of shutter speeds and aperture
values can be freely changed without altering the exposure (Program
Shift). With the following procedures.
1. Turn the mode dial to
2. Focus on the subject on which you wish to lock the exposure and
press the shutter button halfway.
3. Press the
The exposure setting locks and
viewfinder).
4. Press the
value is reached.
5. Recompose the image and shoot.
The setting will cancel after the shot is taken.

Locking the Flash Exposure Setting (FE Lock)

Mode Dial
You can obtain the correct exposure regardless of the location of your
subject in the composition.
1
Raise the flash and display
viewfinder) (p. 40)
When is displayed, press the
2
Focus the AF frame or the spot metering frame on the
subject on which you wish to lock the flash exposure
setting and press the shutter button halfway.
104
, or
button.
or button until the desired shutter speed or aperture
button and set to
.
appears on the LCD monitor (or
on the LCD monitor (or
.