Specifications - Canon PowerShot S2 IS User Manual

Appendix

Specifications

All data is based on Canon's standard testing methods. Subject to change
without notice.
PowerShot S2 IS
Camera Effective Pixels : Approx. 5.0 million
Image Sensor
Lens
Digital Zoom
Viewfinder
LCD Monitor
AF System
Shooting Distance
(from tip of lens)
Shutter
Shutter Speeds
Light Metering System
Exposure Control
System
Exposure
Compensation
ISO Speed
White Balance
Built-in Flash
166
: 1/2.5 -inch CCD (Total number of pixels: Approx 5.3 million)
: 6.0 (W) - 72.0 (T) mm (35 mm film equivalent: 36 - 432 mm)
f/2.7 (W) - f/3.5 (T)
: Approx. 4.0x (Up to approx. 48x in combination with the optical
zoom)
: Color LCD viewfinder Picture coverage rate 100%
Dioptric Adjustment -5.5 - +1.5 m
: 1.8-inch, low-temperature polycrystalline silicon
TFT color LCD (115,000 pixels, picture coverage 100%)
: TTL autofocus (continuous or single)
Focus lock and Manual focus are available
Focusing frame: 1-point AF (any position is available)
: Normal AF: 50 cm (1.6 ft.) - infinity (W)/ 90 cm (3.0 ft.) - infinity (T)
Macro: 10 - 50 cm (3.9 in. - 1.6 ft. (W))
Super Macro: 0 - 10 cm (0 - 3.9 in.) (W)
: Mechanical shutter + electronic shutter
: 15 - 1/3200 sec.
The shutter speed varies according to the shooting mode.
1.3 sec. or slower shutter speeds are available in Shutter-
priority mode or Manual mode.
Slow shutter speeds of 15 to 1.3 sec. or slower operate with
noise reduction.
: Evaluative, Center-weighted average or Spot (Center or AF-point)
: Program AE/Shutter Speed-priority AE/
Aperture-priority AE /Manual exposure control AE lock is (AEB)
and Safety Shift is available.
: ± 2.0 stops in 1/3-stop increments Auto exposure bracketing
(AEB) and Safety Shift is available.
: Auto*, ISO 50/100/200/400 equivalent
* Camera automatically sets the optimal speed.
: TTL auto, pre-set (available settings: Daylight, Cloudy, Tungsten,
Fluorescent, Fluorescent H or Flash) or custom
: Auto*, on*, off
* Red-eye reduction is available.
-1
(dpt)
(W): Wide angle (T): Telephoto