Shooting Close-Ups (Macro) - Canon PowerShot S2 IS User Manual

The tally lamp blinks red during movie
recording and goes off when the recording
session is over. When [Tally Lamp] is set to
[Off] in the Rec. menu, the lamp does not
blink (p. 77).
Shooting a Movie (p. 63)
Changing resolution and frame rate (p. 67)
The Movie icon appears on the LCD monitor (or viewfinder).
The evaluative light metering mode is enabled (p. 89).
The AF frame does not display.
When you stop shooting the movie, the camera reverts to the last still
image settings. However, AF Lock (p. 110) and Program Shift (p. 104)
settings are canceled.

Shooting Close-Ups (Macro)

Use this mode to record subjects in the range of 10 to 50 cm (3.9 in. to 1.6
ft.) from the end of the lens at the maximum wide angle.
Mode Dial
1
Press the
Macro mode.
appears on the LCD monitor.
When the zoom bar is displayed on the LCD
monitor (or viewfinder) during zoom
operation, the zoom range that is not
available for Macro shooting appears in yellow.
If you zoom to the yellow range, the zoom bar disappears and the Macro
icon ( ) is grayed out. In this case, the shutter button still works, but
shooting is the same as normal (non-Macro) mode.
56
button to activate