Sound-Only Recording (Sound Recorder) - Canon PowerShot S2 IS User Manual

You cannot record or playback sound memos for images that
already have an incompatible sound file attached. If you attempt
to record or play such images, the "Incompatible WAVE format"
message will display. Incompatible sound files can be deleted
with this camera.
Sound memos for protected images cannot be erased (p. 121).
The volume can be adjusted in the Set up menu (p. 79).
If you set [Mute] to [On] in the Set up menu, no sound is reproduced,
however, you can resume the sound and adjust the volume by
pressing the

Sound-Only Recording (Sound Recorder)

You can record sound only, without images, for up to two hours at one time.
1
Select [Sound Recorder] from the [
press the SET button.
See Selecting Menus and Settings (p. 73).
2
Use the or
[ ] (Record) from the Sound
Control Panel and press the SET
button.
The recording starts and the elapsed time
is displayed.
Sound Mode Settings (p. 68)
Press the SET button again to stop
recording.
Pressing the shutter button halfway, or pressing the movie button will also
stop recording.
The maximum recording time depends on the space available on the
memory card, and the sound mode.
Recording stops when the memory card is full.
From the Playback mode, the Sound Control Panel can be displayed
by holding the
116
or button.
button to select
button.
(Play)] menu, and
Available Recording Time
Sound Control Panel