Advertisement
Installation
1
815mm
32.09"
Decor Star
2
3
4
5
1. Attach shower arm assembly to the
panel body. Make sure to install screen
washer to protect shower head from debris
in the plumbing system.
2. Install hand shower cradle (1) to the
shower panel by installing the rubber wash-
er (2) and the locking nut (3) and attach
white plastic hose tube connector (5) with
PVC tubing to complete the connection.
(NOTE: Make sure the silicon gasket (4) is
seated properly inside the connector.)
3. Mark the positions of the 2 brackets on
the wall and prepare the tile wall for drilling.
Use a piece of painters tape or masking
tape over the drill area to prevent damages
to the tiles.
(NOTE: The distance between the two
brackets should be 815 mm or 32.09")
7
PL-037-SS Rev. A2 102017
Advertisement
