Advertisement
Operation
Function Selector
Temperature Control
Water Functions
Overhead Rainfall Shower
Horizontal Body Jets
Maintenance Guide
Please follow the cleaning material manufacturer's instructions. In addition, pay attention to the
following points:
1. Regular cleaning can prevent mineral build up on shower head and handheld shower.
2. Use a mild detergent such as liquid dishwashing soap and warm water for cleaning.
3. Do not use abrasive / harsh chemical when cleaning the fi xture as they will damage and dull the
fi nish.
3. Carefully read the cleaner product label to ensure the cleaner is safe for use on the material.
4. Test the cleaner on a small area before using on the entire surface.
5. Do not leave the cleaner on the fi xture longer than necessary.
6. When using spray cleaners, spray fi rst onto a soft cloth or sponge. Never spray directly onto the
faucet as droplets can enter openings and gaps and cause damage.
5. After cleaning, rinse thoroughly with clean water to remove any cleaner residue.
Decor Star
1. Turn the temperature control knob to set the desired
water temperature. The control is preset to maximum
temperature of 100.4 degrees Fahrenheit. To set
higher water temperature, push down the safety pin
and turn the dial counterclockwise to the desired
temperature mark. (Important: Scalding may occur
if bypass the safety pin, use this control with
caution)
2. Select the desired water function by turning the
selector to the corresponding marking. Turn the
function selector to "OFF" position to turn off the water
when not in use.
11
Handheld Shower
Tub Spout
PL-037-SS Rev. A2 102017
Advertisement
