Advertisement
Installation
1
690mm
27.17"
1"
Decor Star
2
3
4
5
1. Install hand shower connector and attach
PVC tubing to complete the connection.
2. Mark the positions of the 2 brackets on the
wall and prepare the tile wall for drilling. Use
a piece of painters tape or masking tape over
the drill area to prevent damages to the tiles.
(NOTE: The distance between the two brack-
ets should be 690 mm or 27.17")
3. Using a drill with a tile bit, drill the hole
slowly into the tile. Do not drill into any piping
or wiring in the wall. Insert the anchors into
the wall.
7
PL-033-SS Rev. A2 092017
Advertisement
