Advertisement
Installation
Decor Star
770mm
30.31"
1"
1. Install hand shower connector and attach PVC
tubing to complete the connection.
2. Mark the positions of the 2 brackets on the wall
and set a side the panel. (NOTE: The distance
between the two brackets should be 770mm or
30.31")
3. Using a drill with a tile bit, drill the hole slowly
into the tile. Do not drill into any piping or wiring in
the wall. Insert the anchors into the wall. (NOTE:
Before installing the wall anchors, use a small
piece of painters tape or masking tape over the
drill area. This will prevent damages to the tile)
7
PL-024-SS Rev. A2 012016
Advertisement
